To replace the catalytic roof liner:
^
To take out the roof liner, first loosen
the two fixing screws holding up the
roof liner and the grill element. Lower
the grill heating element and the roof
liner at the front.
^
You can now pull the roof liner out.
Insert the new roof liner and tighten
the screws back up.
To replace the catalytic back panel:
^
Remove the roasting filter if present
(see "Roasting filter").
^
Remove the side shelf runners.
^
Use a suitable screwdriver to loosen
the screws in the back panel and
remove the panel.
^
Insert a new panel and screw in
firmly. Re-fit the side runners and if
required, the roasting filter.
Do not operate the oven without the
catalytic back panel fitted. This
could cause considerable injury.
To replace the catalytic side panels:
^
First remove the side runners as
described in "To remove the side
runners".
^
Unscrew the fixing screw with a coin
and pull the panel out.
^
Insert the new side panel, screw in
firmly and follow the above
procedure in reverse.
Cleaning and care
56
Summary of Contents for H 4900 B
Page 62: ...Appliance and building in dimensions Installation 62 ...
Page 67: ...67 ...