... cakes or biscuits are unevenly
browned
A small difference in browning is not
unusual. Manufacturers use a
percentage figure in their product
information data for browning levels.
If browning is very uneven, check
– when
baking with Fan heat
D
,
whether the temperature set was too
high or whether the roasting filter was
left in place.
– when
baking with Conventional
heat
A
, check the colour and
composition of the baking tins being
used. Thin and shiny tins are
generally not very good. Try using a
different tin next time.
... an audible tone is sounding and
the symbol
0- -§
has appeared in the
temperature display
The function selector was adjusted with
the safety lock activated. This caused
the oven to switch itself off
automatically.
Turn the function selector back to its
original position. The oven will now
continue to operate as normal.
If you wish to set a different oven
function, you must first turn the function
selector back to "0" and de-activate the
safety lock (see “Safety lock”). You can
then select a different oven function.
.. F and a number appear in the
temperature display
F 05 / F 06
The temperature thermos-
tat is faulty. This caused the oven to
switch itself off automatically.
Call the Service Department, quoting
the fault code.
F 07
The oven has switched itself off
automatically during use (see "Safety
switch off").
F 09
The maximum temperature of the
oven has been exceeded. This caused
the oven to switch itself off
automatically.
Turn the function selector to "0". As
soon as the temperature has fallen to
an acceptable level the fault message
disappears. You can now switch the
oven back on again. If this fault
message occurs again, please call the
Miele Service department, quoting the
fault code.
Problem solving guide
59
Summary of Contents for H 4900 B
Page 62: ...Appliance and building in dimensions Installation 62 ...
Page 67: ...67 ...
