Your appliance is supplied with a
number of standard default settings
(see chart).
These settings
P
can be altered by
changing their status
s
.
–
P : I
to
P : 6
You can change these settings to
suit the way you use the oven.
–
P : 7
– Demo programme
This setting is intended for dealer
showroom use only.
If you have activated the Demo
mode, you will still be able to use the
appliance but the oven compartment
heating and the pump for the
residual moisture evaporation system
of the Moisture plus
d
function will
not work.
To change the "status" of a
setting
^
Select Settings
%
.
^
Touch the OK sensor.
P : I
P : I
will appear in the display.
^
Touch the
V
or
W
sensor repeatedly
until the setting you want appears.
^
Touch the OK sensor.
S 0
The current status
S
for the setting will
appear in the display.
^
Change the setting with the
V
or
W
sensor.
^
Touch the OK sensor.
The change to the status is then stored
in memory.
P
will appear in the display again
together with the number for the setting.
You can alter more settings as long as
the function selector remains at the
Settings
%
position.
The changes remain in memory
even after a power cut.
Settings
%
34
