Reminder programme
If the function selector remains at the
Pyrolytic cleaning position
^
, the
buzzer (if switched on) will sound every
five minutes as a reminder that the
programme has finished.
This
reminder
continues for up to
30 minutes.
After the pyrolytic process
, any
debris (e.g, ash), can easily be wiped
away.
^
Wipe away any debris.
,
Danger of burning.
Remember to wait until the oven has
cooled down before wiping away
any debris.
The fibre-glass seal is particularly
sensitive and should not be cleaned
unless absolutely necessary.
Rubbing it can damage it.
Most residues are easily wiped away
with a damp cloth.
Depending on soiling levels in the oven
there may be visible deposits on the
door and below the trim under the oven
cavity. This is best removed using a
non-abrasive sponge or non-abrasive
stainless steel spiral pad and a mild
solution of warm water and washing-up
liquid.
Spilt fruit juices may cause lasting
discolouration to the surfaces. This
discolouration is permanent but will
not affect the efficiency of the
enamel. Do not attempt to remove
these marks.
The
pyrolytic process will be
cancelled
,
– if the appliance is switched off.
– if another function is selected during
the pyrolytic process.
PY
and
0
will appear in the display.
– in the event of a power cut.
PY
and
0
will appear in the display.
^
Turn the function selector to "0".
If the oven interior temperature is below
280 °C the door lock will be released
after a short while. It can then be
opened.
^
Start the pyrolytic cleaning process
again if necessary.
Cleaning and care
65