Plumbing
133
Attaching the stainless steel
hose to the oven
Make sure that the stainless steel
hose is not kinked or damaged. The
stainless steel hose must
not
be
shortened.
ĺ
Remove the cover from the hard
water port at the back of the oven.
ĺ
Take the angled side of the stainless
steel hose and check whether a
sealing ring is present. If necessary,
insert one.
ĺ
Screw the stainless steel hose
coupling nut onto the threaded union.
ĺ
Ensure that the hose is correctly
fitted and that it is water-tight.
Connecting to the water
supply
Danger of electric shock!
Disconnect the oven from the
electrical supply before connecting
to the water supply.
A faucet with a 3/8" connection thread
is required for the connection.
ĺ
Check that the sealing ring is present.
Replace, if necessary, before
connecting the hose to the water
supply.
3/8"
ĺ
Connect the stainless steel hose to
the water supply.
Old or previously used tubing should
never be used.
Only use the stainless steel hose
supplied.
ĺ
Ensure that the hose is correctly
fitted and that it is water-tight.
ĺ
Slowly open the shut-off valve to the
water supply and check for leaks. If
necessary, check whether the sealing
ring and fittings are tight.
You can now continue with the
installation (See "Installation").
