Controls
21
Sensor
Function
/W
During the heating-up phase and while cooking, you can use this
sensor to change the temperature or the microwave power level.
You can change the temperature for functions which do not use
microwave power.
You can change the microwave power level for functions which
use microwave power.
If no cooking programme is in progress, you can use this sensor
to set a minute minder (e.g. when boiling eggs on the cooktop) at
any point.
If a cooking programme is in progress at the same time, you can
set a minute minder, the cooking duration and a start or finish
time for the programme.
Select this sensor to switch the oven interior lighting on and off.
Depending on the setting selected, the oven interior lighting
switches off after 15 seconds or remains constantly switched on
or off.
Symbols
The following symbols may appear in the display:
Symbol
Meaning
This symbol indicates that there is additional information and
advice about using the appliance. Select
OK
to confirm the
information.
Minute minder
A tick indicates the option which is currently selected.
Some settings, e.g. display brightness and signal tone volume,
are selected using a segment bar.
The system lock prevents the oven being switched on by mistake
(see “Settings – Safety”).
