Operating principles
23
Selecting a function or
operating mode
The sensor controls for the functions
and operating modes (e.g.
Other
)
are located above the display (see
“Operation” and “Settings”).
Touch the sensor for the desired
operating mode or function.
The sensor on the control panel will
light up orange.
For functions: set values such as the
temperature.
Under
Other
: scroll through the
lists until you reach the desired menu
option.
Confirm with
OK
.
Changing the function
You can change to another function
during a cooking programme.
The sensor for the previously selected
function lights up orange.
Touch the sensor for the new
function.
Select
Change function?
and confirm
with
OK
, if required.
The new function appears in the display
with its corresponding recommended
values.
The sensor for the new function lights
up orange.
Under
Other
, scroll through the
lists until you reach the desired menu
option.
Entering numbers
Numbers that can be changed are
highlighted.
Touch the
or
arrow sensor or
swipe to the right or left in the
area until the desired number
is highlighted.
Useful tip:
If you press and hold an
arrow sensor, the numbers continue
scrolling automatically until you release
the arrow sensor.
Confirm with
OK
.
The changed number is now saved.
This will take you back to the previous
menu.
Activating MobileStart
Select the
sensor to activate
MobileStart.
The
sensor lights up. You can
operate your oven remotely with the
Miele@mobile App.
Directly operating the oven via the
touch display takes priority over
operating it via the remote control
function on the App.
You can use MobileStart as long as
the
sensor is lit up.
