Features
24
FlexiClip telescopic runners HFC 72
You can use the FlexiClip telescopic
runners on shelf levels 1–4.
Push the FlexiClip telescopic runners
right into the oven cavity before
placing accessories on them.
The accessories will then
automatically sit securely between the
stoppers at either end of each runner
and be prevented from sliding off.
The FlexiClip telescopic runners can
support a maximum load of 15 kg.
Fitting and removing the FlexiClip
telescopic runners
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, the oven
compartment, or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool down before fitting or removing
the FlexiClip telescopic runners.
The FlexiClip telescopic runners are
fitted in between the two rails that make
up a shelf level.
The FlexiClip telescopic runner with the
Miele logo is fitted on the right.
When fitting or removing the FlexiClip
telescopic runners, do
not
extend
them.
Hook the FlexiClip telescopic runner
onto the lower rail of a shelf level at
the front (1.) and push it along the rail
into the oven interior (2.).