Settings
41
Miele@home
The oven is a Miele@home compatible
appliance. Your oven is fitted ex-works
with a Wi-Fi communication module
and is suitable for wireless
communication.
There are a number of ways of
connecting your oven to your Wi-Fi
network. We recommend connecting
your oven to your Wi-Fi network with
the help of the Miele@mobile App or via
WPS.
After installing the Miele@mobile App
on a mobile device, you can do the
following, depending on your appliance:
– Operate your appliance remotely
– Call up information on the operating
status of your appliance
– Call up information on the
programme sequence of your
appliance
– Set up a Miele@home network with
other Wi-Fi enabled Miele appliances
–
Activate
This setting is only visible if
Miele@home is deactivated. The Wi-
Fi function is reactivated.
–
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the Wi-
Fi function is switched off.
–
Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the Wi-Fi
reception quality, network name and
IP address.
–
Set up again
This setting is only visible if a Wi-Fi
network has already been set up.
Reset the network settings and
immediately set up a new network
connection.
–
Reset
This setting is only visible if a Wi-Fi
network has already been set up. The
Wi-Fi function is deactivated and the
Wi-Fi network will be reset to the
factory default. You must set up a new
connection to the Wi-Fi network to be
able to use Miele@home.
The network settings should be reset
whenever the oven is being disposed
of or sold, or if a used oven is being put
into operation. This is the only way to
ensure that all personal data has been
removed and the previous owner will
no longer be able to access the oven.
–
Set up
This setting is only visible if no
connection to the Wi-Fi network has
been set up yet. You must set up a
new connection to the Wi-Fi network
to be able to use Miele@home.