Moisture Plus
62
Injecting bursts of steam
Danger of injury caused by
steam.
Steam can cause severe scalding.
In addition, steam condensing on the
control panel will cause the sensor
controls and the touch display to
react more slowly.
Do not open the door during a burst
of steam.
Automatic burst of steam
The steam is released automatically
after the heating-up phase.
The water will vaporise in the oven
compartment.
and
Burst of steam
active
appear in the display.
After the burst of steam,
and
Burst of
steam active
will disappear.
Continue cooking until the end of the
programme.
Manual bursts of steam
The bursts of steam can be injected
manually as soon as the
sensor lights
up.
Please wait until the heating-up phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Useful tip:
Refer to the supplied recipe
book or the Miele@mobile App for tips
on when to release the bursts of steam.
Use the
Minute minder
function to
remind you to inject the steam.
Select the
sensor.
The burst of steam will be released.
and
Burst of steam active
will appear in
the display and the
sensor will go
out.
Proceed as described to inject further
bursts of steam, as soon as the
sensor lights up.
After the last burst of steam is injected,
the
sensor, the message and
all
disappear from the display.
Continue cooking until the end of the
programme.
Time-controlled bursts of steam
The oven will release the bursts of
steam automatically at the specified
times.
and
Burst of steam active
appear when
the steam is being injected.
After the last burst of steam is injected,
and
Burst of steam active
disappear.
Continue cooking until the end of the
programme.
