Problem solving guide
94
Problem
Cause and remedy
is flashing in the
display.
There has been a power cut.
Reset the time of day (see "Using for the first
time").
Cooking times will also need to be reset.
is lit up or flashing in
the display.
There has been a power cut which has caused the
Pyrolytic cleaning programme to stop.
The
symbol will remain lit up and the door
locked until the temperature inside the oven drops
to below 280 °C.
The time of day display will start flashing as soon
as you turn the function selector to
0
. Please enter
the time of day again (see "Before using for the
first time").
appears unexpec-
tedly in the display and
the
symbol flashes at
the same time. The
buzzer may also be
sounding.
The oven has been operating for an unusually long
time and this has activated the safety switch-off func-
tion.
Turn the function selector to
0
. The oven is now
ready to use again immediately.
appears in the dis-
play.
The door has not locked for the Pyrolytic cleaning
programme.
Turn the function selector to the
0
position and se-
lect the Pyrolytic programme you want again.
If the problem persists, contact Miele Service.
appears in the dis-
play.
The door lock has not unlocked after the Pyrolytic
cleaning programme.
Turn the function selector to the
0
position.
If the problem persists, contact Miele Service.
appears in the dis-
play,
There is a problem that you cannot resolve.
Call Miele Service.
A noise can be heard
after a cooking process.
The cooling fan will continue to run for a while after
the oven has been switched off to prevent any hu-
midity building up in the oven, on the control panel or
in the oven housing unit.
This cooling fan will switch itself off automatically
after a certain period of time.