Pyrolytic cleaning
^
of the
oven interior
Instead of cleaning the oven by hand,
you can use Pyrolytic (cleaning)
^
.
During pyrolytic cleaning the oven
interior is heated up to over 400 °C. Any
residual soiling is broken down and
reduced to ash by the high
temperatures.
This oven has three levels of pyrolytic
cleaning, each with a different duration.
Select:
– Level 1 for light soiling
– Level 2 for heavier soiling
– Level 3 for very heavy soiling
For safety reasons the oven door is
automatically locked at the beginning of
the pyrolytic cleaning process.
It cannot be opened until the cleaning
process has finished.
The timer can be used to delay the start
of pyrolytic cleaning, for instance to
make use of cheaper electricity tariffs.
At the end of pyrolytic cleaning any
residues such as ash from the pyrolytic
process can be easily wiped away.
Setting up for pyrolytic cleaning
The high temperatures used during
pyrolytic cleaning will damage
accessories that are not designed
for pyrolytic cleaning.
Please remove these accessories
from the oven interior before starting
pyrolytic cleaning. This also applies
to non-pyrolytic accessories
purchased separately to the oven.
The following accessories are suitable
for pyrolytic cleaning and can be left in
the oven:
– Side runners
– FlexiClip telescopic runners HFC72
– Rack HBBR72
^
Take all non-pyrolytic accessories out
of the oven.
^
Place the rack on the top shelf level.
If not removed coarse soiling can
smoke and cause the pyrolytic
cleaning process to switch off.
^
Coarse soiling should be removed
before starting pyrolytic cleaning.
Cleaning and care
108
