Frequently asked questions
92
Problem
Possible cause and solution
The oven does not heat
up.
Demo mode is activated.
The oven can be operated but will not heat up.
Deactivate Demo mode (see "Settings –
Showroom Program").
Power Failure - Program
Canceled
appears in the
display.
There has been a power failure which has caused the
current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
12:00
appears in the
display.
The power supply was interrupted for longer than 200
hours.
Reset the date and time.
Maximum Operating Hours
Reached
appears in the
display.
The oven was operated for an unusually long period
of time. The Safety cut-out feature has been
activated.
Confirm with OK. Clear the message
Program
Finished
by selecting "Back".
The oven is now ready to use.
Door not locked
appears
in the display.
The Self Cleaning program door lock is not locking.
Turn the oven off and then back on again. Then
restart the Self Clean program.
If the message appears again, contact Miele
Technical Service.
Door not released
appears in the display.
The door lock for the Self Clean program will not
deactivate.
Turn the oven off and then back on again.
If the door lock still does not deactivate itself,
contact Miele.
Fault XX
appears in
the display.
A fault has occurred that you cannot resolve.
Contact Miele.
The core temperature
cannot be set.
The roast probe is not recognized by the oven.
Check whether the roast probe is correctly
plugged into the socket.
If the oven still does not recognize the roast probe, it
must be faulty. A replacement roast probe can be
ordered from Miele.
Summary of Contents for H6580BP
Page 102: ......
Page 104: ...M Nr 09 786 820 02 en US CA H6580BP H6680BP ...