Electrical connection
*
I
N
S
T
A
L
L
A
T
I
O
N
*
94
CAUTION:
Before servicing, disconnect the
power supply by either removing the
fuse, shutting off the power main or
manually “tripping” the circuit
breaker.
Installation, repair and maintenance
should be performed by a Miele
authorized service technician. Work
by unqualified persons could be
dangerous and may void the
warranty.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Only operate the appliance after it
has been installed into cabinetry.
The plug must be inserted into a
suitable outlet that has been installed
and grounded in compliance with all
applicable local regulations.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please pass these
instructions on to the customer.
Electrical connection
The oven is equipped with a power cord
approx. 5' 6" (1.7 m) in length with a
NEMA 14-30 P plug ready for
connection to the power supply:
– 120/208 V, 20 A, 60 Hz
or
– 120/240 V, 20 A, 60 Hz
The voltage can be adjusted (see
“Settings - Electrical Version”).
SAVE THESE INSTRUCTIONS FOR
THE ELECTRICAL INSPECTOR'S
USE.
Summary of Contents for H6660BPBRWS
Page 100: ......
Page 101: ......
Page 102: ......
Page 104: ...M Nr 09 786 800 06 en US CA H6560BP H6660BP ...