Setting the temperature
^
Set the required temperature.
^
Touch OK.
Setting the number of bursts of
steam
If you wish the burst of steam to be
injected into the oven automatically
after the heating-up phase:
^
Touch "Automatic burst of steam"
If you wish to inject one or more bursts
of steam manually at specific times:
^
Touch "1 burst of steam", "2 bursts of
steam" or "3 bursts of steam".
When to add the bursts of steam
This option will only appear in the
display after you have selected 1, 2
or 3 bursts of steam.
Tip:
If you have selected more than one
burst of steam, the 2nd one should be
released 10 minutes after starting the
programme at the earliest.
– Manual bursts of steam
If you want to inject the bursts of steam
manually:
^
Touch "Manual".
Then set the minute minder
N
to
remind you when to release them.
– Time-controlled bursts of steam
If you want to time when to release the
bursts of steam:
^
Touch "Time-controlled".
^
Set the time for each burst of steam.
The oven will then release the steam
at the specified times. The time
counts down as soon as the
programme is started.
^
Touch OK.
The prompt to draw in water then
appears.
Moisture Plus
d
69
Summary of Contents for H6890BP
Page 21: ...aOn Off sensor K bDisplay c I N sensors Oven controls 21 ...
Page 153: ...153 ...
Page 154: ...154 ...
