Installation
*INSTALLATION*
82
The Miele Waterproof system
Provided that your dishwasher has
been installed correctly, the Miele
Waterproof system will protect you from
water damage throughout its lifetime.
Water inlet
Danger to health due to wash
water.
Water in the dishwasher is not
drinking water.
Do not drink any water from the
dishwasher.
Health risk and risk of damage
due to contaminated incoming water.
The quality of the incoming water
must correspond to the drinking
water specification of the country in
which the dishwasher is being
operated.
Connect the dishwasher to a drinking
water supply.
The dishwasher may be connected to
cold or hot water (up to max. 65 °C)
supplies.
If energy-saving water heating sources
such as solar energy circulation
systems are used, we recommend
connecting to the hot water connection.
This saves both time and electrical
energy costs. Hot water is used in all
programmes.
The water inlet hose is approx. 1.5 m
long. A 1.5 m long, flexible metal
extension hose (tested to
14,000 kPa/140 bar) is available as an
optional accessory from your Miele
dealer.
Summary of Contents for HG07
