Frequently Asked Questions
124
Problem
Possible cause and solution
The oven does not heat
up.
Demo mode is activated.
The oven can be operated but will not heat up.
Deactivate Demo mode (see “Settings –
Showroom Program”).
Power Failure - Program
Canceled
appears in the
display.
There has been a brief power failure which has
caused the current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
12:00
appears in the
display.
The power supply was interrupted for longer than 200
hours.
Reset the date and time.
Maximum operating duration
reached
appears in the
display.
The oven has been operating for an unusually long
period of time; this has activated the safety shut-off.
Confirm with
OK
. Clear the message
Program
Finished
by selecting
.
The oven is now ready to use again.
Fault XX
appears in
the display.
A fault has occurred that you cannot resolve.
Contact Miele Technical Service.
Door not locked
appears
in the display.
The door lock for the Self Clean program is not
locking.
Turn the oven off and then back on again. Then
start the required Self Clean program again.
If the message appears again, contact Miele
Technical Service.
Door not released
appears
in the display.
The door lock for the Self Clean program is not
unlocking.
Turn the oven off and then back on again.
If the door lock still does not unlock, contact Miele
Technical Service.
Summary of Contents for HR 1924-2
Page 130: ......