Before first use
37
Heating up the oven for the
first time and rinsing the steam
injection system
New ovens may have a slight odor
during their first use. Heating up the
oven for at least an hour with nothing in
it will eliminate the odor. It is a good
idea to rinse out the steam injection
system at the same time.
Ensure that the kitchen is well
ventilated while the appliance is
being heated up for the first time.
Close doors to other rooms to
prevent the odor spreading
throughout the house.
Remove any adhesive labels or
protective films from the ovens and
accessories.
Before heating the oven up, wipe the
cavity with a damp cloth to remove
any dust or bits of packaging that
may have accumulated in the oven
cavity during storage and unpacking.
Insert the FlexiClip telescopic runners
(available to order) to the shelf
runners and insert all trays and the
rack.
Turn on the oven.
The main menu will appear.
Select
Operating Modes
.
Select Moisture Plus
.
The default temperature is displayed
(350 °F/160 °C).
The oven heating, lighting and cooling
fan will turn on.
Set the highest possible temperature
(475 °F/250 °C).
Confirm with OK.
Select
Automatic burst of steam
.
After a short time, a burst of steam is
injected automatically.
Risk of injury!
Steam can cause scalding.
Do not open the door during a steam
burst.
Heat up the oven for at least an hour.
After at least one hour:
Turn the oven off.
After heating up for the first time
Danger of burns! Allow the oven
to cool before cleaning.
Turn on the oven.
Select Light to turn on the oven light.
Take all accessories out of the oven
and clean them by hand (see
“Cleaning and care”).
Clean the oven interior with warm
water and liquid dish soap, applied
with a soft sponge or cloth.
Dry all surfaces with a soft cloth.
Turn the lighting and the oven off.
Leave the oven door open until the
oven interior is completely dry.
Summary of Contents for HR 1924-2
Page 130: ......