Cleaning and care
117
Starting the Self Clean program
Danger of burning!
The front of the oven gets hotter in
the Self Clean program than it does
in normal oven modes.
Do not let children touch the oven
during the Self Clean program.
Select
Maintenance
.
Select
Self Clean
.
Select the Self Clean level required
according to the level of soiling.
Confirm with
OK
.
Follow the instructions in the display.
Confirm with
OK
.
Starting the Self Clean program
To start the Self Clean program
immediately, select
Start Now
.
Confirm by touching OK.
The Self Clean program will then start.
The door locks automatically. The oven
heating and cooling fan functions are
then automatically activated.
The oven light does not come on during
the Self Clean program.
The time remaining for the Self Clean
program appears in the display. This
time cannot be changed.
You can use the timer while the Self
Clean program is running. When the set
time has elapsed, the buzzer will sound
and
will flash. The time will then
continue to increase in the display.
The buzzer will stop and the visual
indicators will go out after you touch the
“Timer” sensor.
Delaying the start of the Self Clean
program
To delay the start of the Self Clean
program, select
Start Later
.
Set the desired time for starting the
Self Clean program.
Confirm by touching OK.
The door will lock automatically.
Start at
and the set start time appear in the
display.
Up until the start time you can alter the
start and end time with
Change
.
As soon as the start time has been
reached, the oven heating and the
cooling fan will turn on automatically.
The duration remaining will appear in
the display.
Summary of Contents for HR 1924-2
Page 130: ......
