Settings
49
Voltage
Setting the voltage (electrical version)
Select the desired voltage and
corresponding frequency.
Confirm with OK.
Sensor group
The oven is factory-set to automatically
detect the wireless roast probe.
If you have purchased a new Miele
roast probe you must enter a 12-digit
code for this setting. You can then start
using the roast probe.
Follow the description supplied with
the replacement part.
Calibrate temperature
Using temperature calibration the
temperature can be modified, in all
modes and Gourmet Center (oven) and
MasterChef (speed oven) programs, so
that it is slightly higher or lower than
shown.
The temperature calibration is
represented by a bar with seven
segments.
If all of the segments are filled the oven
temperature is much higher than
indicated in the display. If no segment is
filled the oven temperature is much
lower than indicated.
Select
or
, to adjust the
temperature calibration.
Confirm with OK.
Summary of Contents for HR 1924-2
Page 130: ......