Frequently Asked Questions
123
Problem
Possible cause and solution
System Lock
appears
in the display when the
oven is turned on.
The system lock
is activated.
You can unlock the oven to start a cooking
program by pressing
for at least 6 seconds.
To permanently deactivate the lock, see “Settings -
System Lock
”.
The oven does not heat
up.
Demo mode is activated.
The oven can be operated but will not heat up.
Deactivate Demo mode (see “Settings –
Showroom Program”).
Power Failure - Program
Canceled
appears in the
display.
There has been a brief power failure which has
caused the current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
12:00
appears in the
display.
The power supply was interrupted for longer than 200
hours.
Reset the date and time.
Maximum operating duration
reached
appears in the
display.
The oven has been operating for an unusually long
period of time; this has activated the safety shut-off.
Confirm with
OK
. Clear the message
Program
Finished
by selecting
.
The oven is now ready to use again.
Fault XX
appears in
the display.
A fault has occurred that you cannot resolve.
Contact Miele Technical Service.
The core temperature
cannot be set.
The roast probe is not recognized by the oven.
Check whether the roast probe is correctly
plugged into the socket.
If the oven still does not recognize the roast probe, it
must be faulty. A replacement roast probe can be
ordered from Miele.
If the door is opened
while using
“Microwave”
, the
oven stops making a
noise.
This is not a fault. If the door is opened while
“Microwave”
is being used, the door contact
switch will turn off the microwave and switch the
cooling fan to a lower speed.
Summary of Contents for HR 1954-2
