Settings
51
Sensor lock
The sensor lock prevents users from
accidently turning the oven off or
changing a cooking program. Once
activated, the sensor lock prevents the
sensor buttons and fields in the display
from working for a few seconds after a
program has been started.
–
On
The sensor lock is active. Before you
can use a mode, you must touch
for at least 6 seconds. The sensor
lock is then deactivated for a short
period.
–
Off
The sensor lock is not active. All
sensor buttons react to touch as
normal.
Calibrate temperature
Using temperature calibration the
temperature can be modified, in all
modes and Gourmet Center (oven) and
MasterChef (speed oven) programs, so
that it is slightly higher or lower than
shown.
The temperature calibration is
represented by a bar with seven
segments.
If all of the segments are filled the oven
temperature is much higher than
indicated in the display. If no segment is
filled the oven temperature is much
lower than indicated.
Select
or
, to adjust the
temperature calibration.
Confirm with OK.
Voltage
Setting the voltage (electrical version)
Select the desired voltage and
corresponding frequency.
Confirm with OK.
Summary of Contents for HR 1954-2
