en
63
Press the + or - direction button to
set the minutes you want.
Press the
OK
butt
on to confirm your
selection.
Press the
Mode
butt
on repeatedly
until the symbol for the operating
mode you want flashes in the control
field.
Press the
OK
butt
on to confirm your
selection.
The settings are shown for approx.
3 seconds in the contr
ol field. The robot
vacuum cleaner will now start to va-
cuum at the same time each day.
If the timer
indicat
or is lit up in the
control field, the timer is activated.
To alter the entries, proceed as de-
scribed above. Then press the
Timer
button for 3 seconds.
Tip: you can save up to 7 individual
“start time – operating mode” combin-
ations if you set the timer using a mo-
bile device, see section “Scout RX
app”.
Please note that the robot vacuum
cleaner always follows the save com-
mands which were set most recently,
regardless of whether the settings
were configured using the remote con-
trol, control unit or with a mobile
device.
Deactivating the timer
Press the
Timer
butt
on on the remote
control briefly.
The T
imer
indicat
or goes out in the
control field.
Activating the timer/displaying a set
start time
Press the
Timer
butt
on on the remote
control briefly.
The timer
indicat
or lights up in the
control field and the set start time is
shown briefly in the display. The robot
vacuum cleaner will start to vacuum at
the set time.
Deactivating the acoustic signals
Acoustic signals are set as standard.
You can deactivate and then reactivate
them.
Summary of Contents for HS18
