en
69
Press the two cleaned side brushes
carefully onto their pins until they
audibly engage. Take care to comply
with the markings
L
and
R
.
In order to continue to achieve the
best possible cleaning results, re-
place the pair of side brushes after
appro
x. 1 year
.
Cleaning the roller brush
Clean the roller brush as required. For
this, you will require the cleaning tool
which is located at the top of the dust
box lid.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Remove both side brushes, see
“Cleaning the side brushes”.
Release the roller brush cover and re-
move the cover.
Remove the roller brush.
Pull the bearing cover off the roller
brush and remove any threads or
hairs that have wound themselves
around the bearing.
Refit the bearing cover, making sure it
clicks into position.
Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors.
Remove the threads and hair using
the wiper which is located on the bot-
tom of the cleaning tool.
Hold the wiper over a bin.
Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
Summary of Contents for HS18
