Fitting the plinth
To ensure trouble-free operation of
the appliance it is essential to fit the
original Miele ventilation grille.
^
Remove ventilation grille
b
by
pressing down the two lugs
a
and
simultaneously pulling the grille
forwards.
The plinth facing
c
can be fitted
without being altered in the following
situations:
It can be fitted unchanged if the
following dimensions are present:
Building-under
height
A
[mm]
Plinth facing
height
b
[mm]
820
100
870
150
The height of the plinth facing has to
be altered in the following
circumtances:
If the building-under height
A = 820
mm
and the plinth facing height
b is
greater than 100 mm
a cut-out has to
be made in the plinth facing.
This also applies to a building-under
height
A = 870 mm
and plinth facing
height
b greater than 150 mm
.
Building-under
height A [mm]
Dimension H
[mm]
820
870
100
150
Installing the appliance
36