background image

Guide to the appliance

23

Adjusting the interior fittings

Adjusting the door shelf/bottle shelf

Only move the door/bottle shelves in
the appliance door when they are
empty.

Push the door shelf/bottle shelf up-
wards, then remove it by pulling it for-
wards.

Replace the door shelf/bottle shelf at
the required height.

Adjusting or removing the bottle
holder (depending on model)

The non-slip fins of the bottle holder
make bottles more secure when you
open and close the appliance door.

The bottle holder can be moved to the
left or right to create more room for
drink cartons.

The bottle holder can be removed com-
pletely, e.g. for cleaning:

pull the bottle holder up to remove it.

Moving the shelves

The shelves can be adjusted according
to the height of the food.

Pull the shelf forwards and tilt it
downwards to remove it.

Fit the shelf with the rear edge facing
upwards in its new position. The
raised edge at the back must face
upwards to prevent food from touch-
ing the back of the appliance and
freezing to it.

Removing the fruit and vegetable
drawer

The fruit and vegetable drawer can
also be removed for loading and un-
loading, and for cleaning.

Summary of Contents for K 7113 F













































Reviews: