Using Super cool and DynaCool
41
DynaCool
When the DynaCool function
is not
switched on, the natural circulation of
air in the appliance will cause different
temperature zones in the fridge zone,
as the cold, heavy air will sink to the
lowest section of the appliance. You
should bear this in mind when placing
food in the appliance (see “Storing
food in the refrigerator section”).
However, if you are storing a large
amount of similar food in the refriger-
ator at any one time, e.g. after your
weekly shop, it is a good idea to turn
on DynaCool. This way you can dis-
tribute the temperature on all the ad-
justable shelves inside the appliance
more evenly so that all the food in the
fridge zone will be chilled to about the
same degree.
The temperature is set as normal with
the temperature control.
Also switch on the DynaCool function
when:
- The ambient temperature is high
(above approx. 35 °C)
- The humidity levels are high (e.g. in
the summer)
The fan will always switch on automat-
ically when the compressor switches
on.
Tip:
As the energy consumption in-
creases when DynaCool
is switched
on, you should turn the DynaCool func-
tion
off again under normal condi-
tions.
To save energy, the fan switches off
automatically whilst the door is open.
Switching DynaCool
on and off
Touch the temperature display for the
fridge zone.
Touch
to switch the DynaCool
function on and off again.
When the DynaCool function is
switched on
,
will light up orange.
Tap on the temperature display to
leave the Settings level.
