Problem solving guide
71
Problem
Cause and remedy
The LED lighting on one
of the adjustable
shelves is not working.
The shelf has not been positioned correctly on the
shelf supports.
Check that the shelf is positioned correctly on the
shelf supports. The shelf has metal contacts at the
front left corner which supply power to the LED
lighting.
Push the shelf in until it clicks into position.
The LED lighting on the stainless steel trim is faulty.
Replace the stainless steel trim with LED lighting.
A replacement is available from the Miele Cus-
tomer Service Department.
The LED lighting is not
working on any of the
shelves.
Liquid has been spilt onto the LED lighting on one of
the shelves or into the contact openings on the left-
hand shelf supports.
The safety switch-off mechanism has switched off
the LED lighting on all the shelves.
Wipe the stainless steel trim with LED lighting with
a damp cloth and dry it or leave it outside the refri-
geration appliance to dry.
Make sure that the contacts are clean and dry be-
fore replacing the shelves with lighting.
Push the shelf in until it clicks into position.
Close the appliance door.
The interior lighting will come on when the door is
opened again.
If this is not the case, then there is a fault.
Call the Miele Customer Service Department.