Before using for the first time
^
Remove the transit fittings from the
appliance, and dispose of them.
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1 1/2 and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
^
Turn the temperature selector in a
clockwise direction away from "0".
The appliance starts to cool down, and
the interior lighting will come on when
the door is opened.
The higher the setting, the lower the
temperature in the appliance.
Switching off
^
Turn the temperature selector in an
anti-clockwise direction from "1" back
to the "0" position. You will feel a
slight resistance when you do this.
The cooling system and the interior light
are now switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
^
switch the appliance off,
^
switch off at the wall socket and
withdraw the plug,
^
defrost the freezer section,
^
clean the appliance out and
^
leave the doors ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the doors are left
shut, there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
13
