Cleaning and care
107
Cleaning the water filter (Inten-
siveClear 2.0 mesh filter) (see
“Optional accessories”)
Depending on the quantity of ice cubes
produced, the IntensiveClear 2.0 mesh
filter must be cleaned approx. every
6 months.
You can use the
Replace the water filter
display on the display as a reminder to
clean the water filter.
Turn the cap of the filter cartridge
counterclockwise until it is in the hori-
zontal position 1. and slide it out of
the filter opening 2.
Pull the mesh out of the back of the
filter cartridge 3.
Rinse the mesh under running luke-
warm water. Turn the mesh over un-
der the running water to clean it on all
sides.
4.
Reinsert the mesh into the back of
the filter cartridge 4.
Slide the filter cartridge as far as it
will go into the filter opening 5., mak-
ing sure the cap is horizontal.
