Stainless steel appliance doors:
The appliance doors have a high
quality, special finish which is resistant
to soiling and is very easy to clean.
Do not use
the following to
clean/condition the doors
– stainless steel cleaning agent:
this will damage the surface.
– Miele stainless steel conditioning
agent:
this will cause noticeable smearing.
Ventilation gaps
^
The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Back of appliance -
compressor and metal grille
The compressor and the metal grille at
the back of the appliance (heat
exchanger) must be dusted at least
once a year. A build-up of dust will
increase the energy consumption of the
appliance.
^
Make sure that the cable and other
components do not get broken off,
bent or damaged in any way during
cleaning.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
After cleaning
^
Push the dividing plate in until it
clicks into place.
^
Replace all shelves and accessories
in the refrigerator section.
^
Put the food back in the refrigerator
section.
^
Reconnect to the mains and switch
the appliance back on.
^
Switch on the Super freeze function
so that the freezer can cool down
quickly.
^
Once the temperature in the freezer
has reached the required
temperature, place the food back in
the freezer.
^
Switch off Super freeze by pressing
the Super freeze button.
Cleaning and care
40
