Selecting further settings
41
Setting the display brightness
You can set the display brightness in
the segment bar:
If all segments are filled in, the max-
imum brightness is selected.
You will see the brightness change as it
is being adjusted.
Setting the temperature unit °C/°F
You can choose between degrees
Celsius
°C
and degrees Fahrenheit
°F
for the temperature display.
Switching off Demo mode
Demo mode allows the appliance to
be presented in the showroom without
the cooling system being switched on.
Do not activate this setting for do-
mestic use!
If Demo mode has been switched on as
a default setting,
will show in the dis-
play. The function can be switched off
here.
If Demo mode has been switched off it
cannot be switched on again via Set-
tings mode
.
Resetting to the factory default set-
tings
All appliance settings are reset to the
factory default and the appliance is
switched off.
Accessing Information
Appliance data (model number and
serial number) is shown in the display.
Tip:
This data is important when report-
ing an appliance fault to Miele Service.
Confirm with
OK
to leave the informa-
tion screen.
– Displaying licence agreements
Licences used can be displayed via
©
.
Summary of Contents for KFN 28032 D ws
Page 85: ......
Page 86: ......
Page 88: ...M Nr 10 360 590 00 en GB KFN 28032 D ws KFN 29042 D ws KFN 29032 D ws KFN 29032 D edo ...