After setting the temperature you can
see the following information in the
display by pressing the +/- buttons:
– When first pressed, the
last
temperature selected
flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the display will change to
show the current average temperature
in the appliance.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full
and
for
approx. 24 hours if the appliance is
full
before checking the temperature
display as it will take this long for the
display to show the accurate
temperature of the appliance. If, after
this time, the temperature is still too high
or too low, you will need to adjust it
again.
Temperature range
The temperature can be adjusted:
– In the refrigerator section from 4 °C
to 9 °C
– In the freezer section from -14 °C to
-28 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
Setting the temperature in the
StayFresh zone
The temperature in the StayFresh zone
is automatically held at 0 to 3 °C.
It can be raised or lowered, e.g. if you
want to use it for storing items like fish.
^
Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light flashes
and a
;
flashes in the temperature
display.
^
Press one of the temperature selector
buttons repeatedly until a
=
appears
in the display.
^
Press the Super freeze button again.
=
lights up in the temperature display.
^
You can now adjust the temperature
in the StayFresh zone by pressing the
temperature selector buttons. You
can choose from settings
1
to
9
:
1
: lowest temperature,
9
: highest temperature.
The correct temperature
18
