^
Remove cover
g
, and unscrew hinge
bracket
h
.
^
Fit hinge pin
i
in the second hole of
hinge bracket
h
.
^
Refit bracket
j
and cover
k
turned
through 180° on the opposite side.
^
Screw hinge bracket
h
into the
opposite side.
The
M4 screw
has to be screwed into
the left hole of the hinge bracket.
^
Turn cover
g
through 180°, and fit it
on the other side.
^
Exchange cover
l
in the middle of
the appliance with hinge bracket
m
.
To do this:
Unscrew cover
l
and hinge bracket
m
, turn them around and screw in on
the opposite side.
^
Pull bearing bush
n
downwards out
of hinge bracket
m
and refit it from
above into the hinge bracket.
^
Remove the plugs from the door
bearing bushes in the top of the
doors and refit on the opposite side.
^
Hang the upper appliance door on
hinge pin
i
and close the appliance
door.
^
Push middle hinge pin
e
from below
through hinge bracket
m
into the
upper appliance door.
^
Check that the upper door is
correctly aligned. If necessary, align
it using the long slots in hinge
bracket
m
.
^
Hang the lower door on hinge pin
e
and then close the appliance door.
^
Fit lower hinge bracket
b
in the door
bearing of the lower door. Then screw
it securely to the housing.
^
Refit cover
a
.
Changing the door hinging
49
