Con@ctivity
48
Your cooktop is communication-
enabled and can communicate via the
dongle supplied with selected
rangehoods (Con@ctivity).
The cooktop sends information on its
operating status to the rangehood. The
operation of the rangehood is
automatically controlled by the power
level of the connected cooktop.
Further information regarding
Con@ctivity is available on the Miele
website and in the instruction manuals
of the various components.
Signing on
To sign the cooktop on to Con@ctivity,
first sign on the rangehood.
Disconnect the cooktop from the
mains electricity supply.
Connect the dongle to the cooktop
(see the installation instructions for
the dongle).
Reconnect the cooktop to the mains
electricity supply.
The signing on procedure must be
carried out within 10 minutes after
reconnecting the electricity supply.
Start signing on the rangehood (see
the operating and installation
instructions for the rangehood).
Remove any pots or pans from the
cooktop.
There must not be any pots or pans
on the cooktop when the signing on
process is being carried out.
Switch the cooktop on
.
Set power level
1
for all the cooking
zones.
The
symbol will flash.
Wait for at least 1 minute and switch
the cooktop off with the
sensor.
Finish signing on the rangehood (see
the operating and installation
instructions for the rangehood).
Summary of Contents for KM 6324-1
Page 61: ......
Page 62: ......
Page 64: ...M Nr 10 032 890 03 en AU NZ KM 6324 1 KM 6345 1 KM 6349 1 ...