Installation
-
I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-
79
Refit door opening aid
on the op-
posite side.
Push door opening slider
through
the slots until it clicks into position.
The flush side of the door opening
slider must face the door seal. The
plastic lug on the slider must not abut
the door seal but must point towards
the outer edge of the door.
Secure the door opening aid using
the screw with the plastic collar
and the screw without a plastic col-
lar
. Do not overtighten the screws!
Tip:
Check whether the door opening
aid moves easily by pressing it. If it
does not move freely, the screws
should be loosened slightly.
Fit covers
and
.