Building in the appliance
80
Carefully remove the protective film
from the profile strip
.
Stick the profile strip
onto the side
of the appliance on which the door
will open, flush with the front.
1. Align the profile strip with the bottom
edge of the top fixing bracket.
2. Stick it down along its entire length.
Building in the appliance
If the appliance is pushed too far into
the niche, the doors may not close
properly once the cabinet door has
been fitted. This can cause ice to
build up and condensate to accumu-
late, and cause the appliance to mal-
function. These issues can all lead to
increased energy consumption.
Push the appliance into the building-
in niche, making sure a gap of
1 5/8" (42 mm)
is maintained all
around between the appliance cas-
ing and the front of the cabinet side
walls.
