The edge of shelf's rear stop must face
upwards so that food does not touch
the rear wall and freeze to it.
Stops prevent the shelves from being
pulled out accidentally.
Adjusting the bottle rack
The bottle rack can be placed on
different levels in the appliance.
^
Raise the rack, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The rear stopping bar must be raised to
prevent the bottles touching the rear
wall.
The bottle rack has stoppers at the
sides to prevent the rack being pulled
out unintentionally.
PerfectFresh drawers
The drawers in the PerfectFresh zone
are on telescopic rails, and can be
removed for filling, emptying or
cleaning purposes:
To make it easier to pull out the
drawers, remove the bottle shelf from
the appliance door.
^
Pull the drawer out as far as it will go.
^
Hold the drawer at the sides towards
the back, lift it slightly and then pull it
out.
Push the runners back in again to
avoid damaging them.
^
Carefully pull out the lid between the
drawers slightly, and lift it down and
out.
Adjusting the interior fittings
36
