Refitting the appliance doors
^
Place the lower door onto hinge pin
k
.
^
Close the lower door.
^
Turn middle hinge plate
f
180°, fit to
the opposite side of the the lower
door and secure it with screws
e
.
^
Fit plastic cover
g
.
^
Then fit the upper door onto middle
hinge plate
f
.
^
Fit upper hinge plate
c
to the
opposite side on the upper door and
secure it with screws
d
. If necessary
drill pilot holes for the screws or use
a battery operated screwdriver.
^
Push cover
a
onto hinge plate
c
,
making sure that it clicks into place.
^
Click cover
b
back into place on the
opposite side.
^
Unscrew foot
m
until it sits on the
floor.
Changing the door handles
^
Carefully remove cover
a
and
stoppers
b
from the sides using a
flatheaded screwdriver.
^
Push cover
c
to the left by placing a
suitable wooden or plastic tool
d
in
the groove on the right hand side.
^
Carefully remove cover
c
.
Be careful not to let the tool slip,
causing damage to the appliance.
^
Loosen screws
e
on the handle side
and in the middle, and remove
handle
f
.
Changing the door hinging
45