^
Align both appliances using a spirit
level.
– Align front feet
c
using a spanner
d
.
– Align the back feet using adjusting
device
e
and socket wrench
f
.
Turn the adjusting device clockwise
to raise the appliance up at the back.
^
Close the doors to check whether the
door handles are correctly aligned
with one another.
Make sure that bearing blocks
g
are aligned with one another. If they
are not, the covers will not fit
properly.
^
Remove top screws
h
from bearing
blocks
g
.
^
Loosely attach lower bracket
i
with
screws
h
.
^
Push the two appliances together,
and align them again.
^
Now tighten screws
h
.
Do not move the appliances until all
the brackets are securely fitted.
Installing in a side-by-side combination
46
Summary of Contents for KWFN 8706 SE ED-1
Page 54: ...54 ...
Page 55: ...55 ...
Page 56: ...Alteration rights reserved 4905 KWFN 8706 SE ed 1 M Nr 06 785 780 00 en GB ...