Preparation for use
Setting the time of day
Connect the appliance to the elec-
tricity supply.
All the displays light up in the dis-
play area.
Press the C touchpad.
0 appears in the display area.
Press the
m
touchpad and use the
rotary control to set the hours.
Press the
m
again and use the rot-
ary control to set the minutes.
Press the
m
touchpad to confirm
the time now showing in the display
area.
The two dots between the hours and
minutes flash every two seconds.
The appliance is now ready for use.
Altering the time of day
Press the
m
touchpad and set the
time of day as described above.
Calling up the time of day
Press the
m
touchpad to call up the
time of day during a cooking pro-
cess. The time of day will be shown
for 5 seconds.
Minute minder
Press the
l
touchpad.
:0 lights up in the display area and
the time symbol flashes.
Use the rotary control to set the
minute minder time you require
(5 seconds to 95 minutes).
The
h
symbol flashes in the display
area.
Press the
h
START touchpad.
In the display area the set time
begins to count down in one second
steps.
An audible tone sounds after the
minute minder time has elapsed.
Audible tone
An audible tone sounds after the set
times have elapsed. The time of day re-
appears in the display area.
Press the C touchpad to cancel the
tone.
Function safety lock
Press the +/- function touch pads at
the same time.
The microwave oven can not now be
used as all the programme functions
are locked.
Press the +/- at the same time again to
cancel the function safety lock.
All the touchpads are available for
use again.
If the appliance is disconnected
from the electricity supply the func-
tion safety lock is switched off.
Preparation for use
17