Calling up the microwave power set-
ting
Press the
ü
P + or - touchpads, if
you want to check the power setting
during a process. The power setting
will appear for 5 seconds.
Altering settings
Before a process has begun
Alter the settings before starting the
programme.
After a process has begun
press the C touchpad.
A new setting can now be entered.
Press the
h
START touchpad, to
restart the process.
Cancelling a process
Press the C touchpad, to cancel any
functions that have been entered, if
for example the food is cooked be-
fore the set time.
The time of day appears.
Switching off the turntable
The turntable is always switched on
and should only be switched off if there
is a danger of something blocking it,
e.g. a large dish which is wider than
the turntable.
Press the
ä
touchpad to switch off
the turntable. This can be done
either before starting or during the
cooking process.
Fault indication
Allow the appliance to cool down
with the door open for about 15 - 20
minutes, if an "E" shows in the dis-
play, indicating that the oven interior
is too hot.
Then press the C touchpad and re-
enter the settings.
Operation
21