Operation
Delaying start
The start time of a process can be pre-
programmed up to 24 hours before-
hand.
You can store all the operating functions,
e.g. grilling, combination functions, and
automatic programmes [Exception:
Automatic reheating of various dishes
(Auto
P
) and Automatic heating of
liquids (
Ü
)].
A programmed sequence of two func-
tions can also be pre-programmed.
The start time can be set in hours
and minutes. First press the
d
touchpad, and use the rotary selec-
tor to set the hour of the starting time
you require.
Then press the
d
again and use the
rotary selector to set the minutes.
The selected start time appears in
the display area, the clock symbol
for delay start flashes.
Press the
d
touchpad.
The time of day appears in the dis-
play area, the clock symbol for de-
layed start lights up.
Proceed as previously described to set
the operating mode.
Example: Microwave - Solo mode
Press the
ü
P +/- touchpads and
select the power setting required
(P 1 to P 9).
The symbol
4
for microwave mode
and the chosen power setting ap-
pear in the display area, and the
time symbol flashes.
Use the rotary control to enter the
length of time of the process.
The symbol
4
for microwave mode
and the length of time of the process
appear in the display area.
The
h
symbol flashes.
Press the
h
START touchpad.
The current time of day, the
4
sym-
bol for microwave mode and the
clock symbol for delayed start ap-
pear in the display area.
The appliance will then switch on auto-
matically at the programmed start time,
and off at the end.
If you are using the delaying start
function with the microwave mode,
the food must have already been
placed in the cooking compartment.
If you open the door again before the
starting time,
Press the
h
START touchpad again
after closing the door, to ensure that
the process starts at the preselected
time.
If you wish to alter the starting time,
Press touchpad C, and re-pro-
gramme.
If you wish to delete the starting
time,
Press the C touchpad.
Operation
32
