Electrical connection and Installation
Non-rewireable plugs BS 1363
If this machine or appliance is fitted
with a non-rewireable plug, the follow-
ing information applies:
If the socket outlets are not suitable for
the plug supplied with this product, it
must be cut off and an appropriate
plug fitted.
The plug cut from the flexible cord
should be disposed of and on no ac-
count be inserted into a socket else-
where in the house (electric shock ha-
zard).
The fuse cover must be refitted when
changing the fuse, and if the fuse
cover is lost, the plug must not be used
until a suitable replacement is ob-
tained. The colour of the correct re-
placement cover is that of the coloured
insert in the base of the plug, or the col-
our that is embossed in words in the
base of the plug (as applicable to the
design of plug fitted).
The correct fuse rating of the replace-
ment fuses that are ASTA approved to
BS 1362 should be fitted. Replace-
ment fuse covers may be purchased
from your local electrical suppliers, or
Miele Service Agent.
Installation
Do not position the appliance too
close to adjacent furniture.
A space of 5 cm is required all
round the appliance for ventilation.
The microwave oven should be posi-
tioned or built-in at least 85 cm
above the ground (EN 60335).
When installing a microwave oven
care should also be taken that the
air can be freely discharged from
under and behind the appliance.
Do not place any objects on the ven-
tilation outlets or block the space
between the appliance floor and the
surface upon which it is placed.
The microwave oven can be:
– placed on a worktop
– built under a wall unit in conjunction
with a building under frame (M 316 E
only).
– built into a wall unit (M 316 EG only)
or into a tall unit.
M 336 on the other hand can be built
under a worktop.
Use the appropriate building frame and
follow the fitting instructions.
The special fitting kit with instructions is
available from the Miele specialist
dealer or the Domestic Sales Depart-
ment.
Electrical connection and Installation
44