Warning and Safety instructions
This appliance complies with all rele-
vant legal safety requirements Im-
proper use of the appliance can,
however, present a risk of both per-
sonal injury and material damage.
Before installation and before using
the appliance for the first time, read
the operating instructions carefully.
They contain important notes on
safety, on the operation and care of
the appliance. This way you will
avoid the risk of accidents and dam-
age to the appliance.
Do not let children access the ap-
pliance or its controls. Supervise its
use by the elderly or infirm.
Keep these instructions in a safe
place and pass them on to any fu-
ture user.
Correct usage
The appliance is intended for do-
mestic use only: to cook food, and
in particular to defrost, re-heat, cook,
and to grill (except M 316 E). Any other
usage is at the owner’s risk and could
be dangerous. The manufacturer can-
not be held responsible for damage
caused by improper use of the ap-
pliance.
Technical safety
Do not use the microwave if
– the door is warped.
– the door hinges are loose.
– holes or cracks are visible in the cas-
ing, the door, the door seal or the oven
interior walls. Switching on with this
type of damage could result in micro-
waves no longer being contained
within the oven, and presenting a ha-
zard to the user.
Installation work and repairs may
only be carried out by suitably
competent, authorised persons trained
by the manufacturer to ensure safety.
Repairs and other work by unqualified
persons could be dangerous.
Never open the casing of the ap-
pliance.
Tampering with electrical connections or
components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
If the connection cable is dam-
aged the new cable must be fitted
by a Miele service engineer or an auth-
orised agent.
Before connecting the appliance to
the mains supply make sure that
the rating on the data plate corre-
sponds to the voltage and frequency of
the household supply. It is essential
that these data correspond as other-
wise damage will occur to the machine.
If in doubt consult a suitably competent
person.
The electrical safety of this ap-
pliance can only be guaranteed
when continuity is complete between
the appliance and an effective earthing
system, which complies with local and
national regulations. It is most import-
ant that this basic safety requirement is
tested by a qualified electrician. The
manufacturer cannot be held respon-
sible for the consequences of an inade-
quate earthing system, such as electric
shock.
Warning and Safety instructions
6