Appliance front and control
panel
^
All external surfaces and controls can
be cleaned using warm water with a
little washing up liquid applied with a
soft sponge or cloth.
^
Wipe the surfaces dry using a soft cloth.
To prevent the risk of scratches and
damage to the surface of the control
panel or glass or stainless steel front of
your appliance, please pay particular
attention to the following cleaning
instructions.
Controls
The controls are susceptible to
scratches and abrasions and may
suffer discolouration or damage if
soiling is left on them for too long.
Remove any soiling straight away.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– stainless steel cleaners,
– oven sprays.
Glass fronted appliances
The appliance front is susceptible to
scratches and abrasions.
Avoid:
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– oven sprays.
Stainless steel fronted appliances
The appliance front is susceptible to
scratches and abrasions.
Stainless steel surfaces can be cleaned
with a proprietary non-abrasive
cleaning agent designed specifically
for use on stainless steel. N.B. Do not
use it on the controls.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
To help prevent re-soiling, proprietary
conditioning agents for stainless steel
can also be used. Apply sparingly
following the direction of the grain.
Wipe dry with a soft cloth.
Cleaning and care
38
Summary of Contents for M 625 EG
Page 46: ...46 ...
Page 47: ...47 ...
Page 48: ...Alteration rights reserved 4404 M 625 EG M Nr 06 196 550 02 en GB ...