Keeping warm function
The keeping warm function will switch
on automatically at 80 W for a maximum
of 15 minutes approx. 2 minutes after
the end of a cooking programme which
has used at least 450 W, providing the
door remains closed and no sensors
are touched.
h
, 80 W and
H:H
will light up in the
display.
Opening the door or operating one of
the sensors or selectors while the
keeping warm function is in progress
cancels the function.
The keeping warm function cannot be
set as a separate function.
You can deactivate this function (see
"Changing settings").
Quick start (programmable)
Touching "Start"
c
is sufficient to set
the appliance operating on maximum
power.
Three set durations are stored in the
memory:
^
30 secs: Touch "Start"
c
once
^
1 min: Touch "Start"
c
twice
^
2 min: Touch "Start"
c
three times
Touching "Start"
c
four times in
succession will bring back the first
stored duration and so on.
The cooking duration can be increased
by touching "Start" during operation;
each time the "Start" is touched, the
cooking duration is increased by
another 30 seconds.
Programming times
To alter the set durations:
^
Touch "Start"
c
to select the duration
you want to reprogramme (touch
once, twice or three times).
^
While keeping your finger on the
"Start" sensor, alter the duration with
the time selector (to max. 15
minutes).
The altered programme runs when
you take your finger off "Start".
An interruption to the power supply
will cancel any altered programmed
durations, and they will need to be
entered again.
Operation
37
Summary of Contents for M 6262 TC
Page 78: ...78 ...
Page 79: ...79 ...
Page 80: ...Alteration rights reserved 0813 M 6262 TC M Nr 09 569 560 02 ...