Operation - Grilling
52
Change the time using the arrow
sensors.
Continue the programme by touching
the
sensor.
Selecting a start time or end time
The grilling time can be set to start at a
certain time and will end after the set
duration.
Touch the
sensor.
The
sensor on the control panel will
light up orange.
Duration
and 00:00
min
appear in the
display.
Use the arrow sensors to set the
cooking duration you want and
confirm your selection with
OK
.
Then touch the
sensor.
Duration
and the set duration for the
grilling programme are shown in the
display.
Choose between the options
Start at
and
Finish at
using the arrow sensors.
With
Start at
, you specify when you
want the grilling programme to start.
With
Finish at
, you specify when you
want the grilling programme to end.
Alternatively, you can also select
Min.
minder
here if you want to start a
minute minder for a separate process
in addition to the grilling programme.
Confirm your selection with
OK
.
Start at
or
Finish at
appears in the
display, depending on which option you
have selected.
The time is also highlighted.
Use the arrow sensors to select the
start or end time you want and
confirm by touching
OK
.
Start at
appears in the display and the
sensor lights up.
The grill programme will start at the
selected time.
A signal tone will sound when the
cooking programme is finished.
Combining grill and microwave
This function works well for baking and
browning. The microwave cooks the
food, and the grill browns it.
The grill can be combined with
3 different microwave power levels:
150, 300 and 450 watts.
It is not possible to switch between
these 3 power levels during the cooking
process without interrupting the
programme.
The combinations
and
can be
selected directly on the control panel;
the combination
can be found
under
.
Select the combination you want by
touching the
,
or the
sensor if you want to select
.
The corresponding sensor on the
control panel will light up orange.
Duration
and 00:00
min
appear in the
display.
Use the arrow sensors to set the
cooking duration you want and
confirm your selection with
OK
.
Touch the
sensor.