Installation
The appliance must be built in
before it can be used. Otherwise it
poses an electric shock hazard.
^
Draw a line inside the housing unit to
mark the middle of the unit as
illustrated.
^
Position the fixing bracket on this
middle line. There are two indented
marks on the bracket to guide you.
Use the appropriate one for the width
of your kitchen cabinet.
^
Fit one screw
a
into the centre of the
first long slot.
^
Check the alignment with the front
edge of the unit and with the middle
line, and then fit another screw
a
into
the other long slot.
^
Then tighten both of these screws.
1. Niche height 350 mm
^
Place the appliance in the housing
unit and using your hands push on
both sides of the back of the oven
interior to move the appliance into
position. It will engage in position
when it is correctly installed.
^
Check that it is correctly aligned.
Installation
55
Summary of Contents for M 8151
Page 57: ...57 ...
Page 58: ...58 ...
Page 59: ...59 ...
Page 60: ...Alteration rights reserved 1606 M 8151 M 8161 M Nr 06 542 950 04 gb GB ...