Quick start (programmable)
Pressing the Start button
c
is sufficient
to set the appliance operating on
maximum power.
Three set durations are stored in the
memory:
^
30 secs: Press Start
c
once
^
1 min: Press Start
c
twice
^
2 min: Press Start
c
three times
Pressing the Start
c
button four times
in succession will bring back the first
stored duration and so on.
The cooking duration can be increased
by pressing the Start button during
operation; each time the Start button is
pressed, the cooking duration is
increased by another 30 seconds.
Programming durations
To alter the set durations:
^
Use the Start
c
button to select the
duration you want to reprogramme
(press once, twice or three times),
and hold the Start
c
button pressed
in.
^
While holding the Start button
pressed in, alter the duration with the
time selector (to max. 15 minutes).
The altered programme runs when
the Start
c
button is released.
An interruption to the power supply
will cancel any altered programmed
durations, and they will need to be
entered again.
System lock
The system lock prevents the appliance
being used by children, for example.
To activate the system lock
^
Press and hold the Stop/C button in
until an audible tone sounds and the
key symbol appears in the display:
The key symbol will go out after a short
time.
The key symbol reappears whenever
any button or one of the rotary selectors
is operated.
After an interruption to the mains
power supply, the system lock will
need to be re-activated.
To cancel the system lock
^
Press the Stop/C button again and
hold it pressed in until an audible
tone sounds.
Operation
35
Summary of Contents for M 8201-1
Page 70: ...70 ...
Page 71: ...71 ...
Page 72: ...Alteration rights reserved 3912 M 8201 1 M Nr 09 472 770 01 ...